# SineCore CNC Software Update 1.1.002

**URL:** <https://sinecorecnc.discourse.group/t/sinecore-cnc-software-update-1-1-002/23>\
**Category:** Software Updates\
**Created:** [March 17, 2026, 3:43pm UTC](https://sinecorecnc.discourse.group/t/sinecore-cnc-software-update-1-1-002/23 "2026-03-17T15:43:35Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![Aidan](https://avatars.discourse-cdn.com/v4/letter/a/c5a1d2/32.png) [@Aidan](https://sinecorecnc.discourse.group/u/Aidan)\
**Post date:** [April 9, 2026, 10:07pm UTC](https://sinecorecnc.discourse.group/t/sinecore-cnc-software-update-1-1-002/23/3 "2026-04-09T22:07:27Z")

</div>

Hey @djpaulyd Yes flood is M08. However, the flood coolant can be enabled through the canned cycles by clicking on the advanced tab, then selecting “Flood”

 ![image](https://canada1.discourse-cdn.com/flex003/uploads/sinecorecnc/original/1X/4bad8c44ab62ccea9e81b0aace61c739d3e6b0a0.jpeg)

Otherwise, you can enable flood coolant by clicking the “Service” tab at the bottom, then at the top of the page, click the “Machine I/O” tab. At the bottom of the second column you will see coolant listed.

Make sure you haven’t missed the latest update!

> [@SineCore CNC Software Update 1.1.005](https://sinecorecnc.discourse.group/t/sinecore-cnc-software-update-1-1-005/28):
>
> Download: [SineCore SC-512L Installer (v1.1.005)](https://github.com/SineCoreCNC/SC-512L-Software/releases/latest/download/SineCore_SC-512L_Installer.exe) Added additional saves to prevent loss of data.

---

_[View the full topic](https://sinecorecnc.discourse.group/t/sinecore-cnc-software-update-1-1-002/23)._